|
Mechanical Properties |
FS 316L
Stainless Steel |
FS 15-5PH
Stainless Steel |
FS 17-4PH
Stainless Steel |
FS 420
Stainless Steel |
|
Density |
≥ 7.9 g/cm³ |
≥ 7.7 g/cm³ |
≥ 7.75 g/cm³ |
≥ 7.7 g/cm³ |
|
Tensile Strength (Rm) ASTM E8/E8M-13a |
≥ 600MPa |
1150±100 MPa |
950±100 MPa |
≥ 1100 MPa |
|
Yield Strength(Rp0.2) ASTM E8/E8M-13a |
550±50 MPa |
1050±1000 MPa |
600±50 MPa |
900±100 MPa |
|
Elongation after Fracture (A50mm) ASTM E8/E8M-13a |
≥ 30% |
16±4 % |
30±5 % |
≥ 2% |
|
|
|
|
|
|
|
Mechanical Properties |
FS 18Ni300
Maraging Stell |
FS CoCrMo
Cobalt Chrome |
FS CoCrMoW
Cobalt Chrome |
FS AlSi10Mg
Aluminum |
|
Density |
≥8.0g/cm³ |
≥ 8.35 g/cm³ |
≥ 8.65g/cm³ |
≥ 2.65g/cm³ |
|
Tensile Strength (Rm) ASTM E8/E8M-13a |
1100±100 MPa |
≥1150 MPa |
≥1100 MPa |
430±30MPa |
|
Yield Strength(Rp0.2) ASTM E8/E8M-13a |
1050±100 MPa |
n/a |
n/a |
276±30 MPa |
|
Elongation after Fracture (A50mm) ASTM E8/E8M-13a |
12±3% |
≥ 10% |
≥ 10% |
3.0±1% |
|
|
|
|
|
|
|
Mechanical Properties |
FS Ti6Al4V
Titanium |
FS IN625
Inconel |
FS IN718
Inconel |
FS GH3536
Inconel |
|
Density |
≥ 4.4 g/cm³ |
≥ 8.4 g/cm³ |
≥ 8.2g/cm³ |
≥ 8.3 g/cm³ |
|
Tensile Strength (Rm) ASTM E8/E8M-13a |
≥ 1100MPa |
1000±100 MPa |
1050±100 MPa |
840±50 MPa |
|
Yield Strength(Rp0.2) ASTM E8/E8M-13a |
970±100MPa |
730±50 MPa |
750±50 MPa |
650±50MPa |
|
Elongation after Fracture (A50mm) ASTM E8/E8M-13a |
≥ 7.5% |
35±5 % |
25±5 % |
30±5% |
|
|
|
|
|
|
|
Mechanical Properties |
FS CuSn 10
Bronze |
|
|
|
|
Density |
≥ 8.78 g/cm³ |
|
|
|
|
Tensile Strength (Rm) ASTM E8/E8M-13a |
500±50MPa |
|
|
|
|
Yield Strength(Rp0.2) ASTM E8/E8M-13a |
380±30 MPa |
|
|
|
|
Elongation after Fracture (A50mm) ASTM E8/E8M-13a |
30±10% |
|
|
|
FS AlSi10Mg | Aluminum
Aluminum alloy with good corrosion resistance and high heat and electrical conductivity.
Specifications：
-
Outstanding corrosion resistance
-
Excellent mechanical property
-
High specific strength and specific stiffness
Application：
-
Manufacturing of end-use complex parts for a wide range of applications from automotive to aerospace industry
-
Manufacturing of final parts for Architecture sector
-
Produce parts of engineering elements
Disclaimer:
Many factors may affect the performance characteristics of products. We recommend that you make tests to determine the suitability of a product for your particular purpose prior to use. Farsoon makes no warranties of any type, express or implied, including but not limited to, the warranties of merchantability or fitness for a particular use. This also applies regarding the consideration of possible intellectual property rights as well as laws and regulations.
Farsoon reserves the right to change the technical data without notice. Farsoon®, Buildstar®, Makestar® are registered trademarks of Farsoon Technologies.
Last Change: 2019-03-05
